CP200 Features and Specifications Follow
This article contains the features, and specifications for the CP200.
- All Cloud Punch timeclocks require a subscription to a cloud portal account.
- Click this link to shop for RFID badges and key fobs.
- Also, see the documents attached to this article below for the Product Manual, Quick Start Guide, a How-To Card, One Sheet, and a Mounting Template.
Versions
CP200
Features
- PIN authentication
- Fingerprint authentication
- RFID badge/key fob authentication (26-bit Wiegand @ 125KHz)
- Break and Lunch punching
- Department Transfers
- Off-line punching
- LAN/WIFI
Product Specifications
- Dimensions - W 7-1/2”, H 5”, D 1-1/4”
- Weight - 11.3oz
- Power - DC 12V-2A, cord length – 5' 8”
- Operating - Temperature 0-45C
- Operating - Humidity 20-80%
- Screen - 5”
- Speaker -1W internal
- PIN - on-screen keypad
- RFID -26-bit Wiegand @ 125KHz
- Biometric - fingerprint recognition
- Max Fingerprint Templates - 3000 templates
- Ports - 80, 443
- WIFI - 2.4g b/g/n
- LAN - ethernet
- Web Servers (for whitelisting) - ws.mycloudpunch.com and *.mycloudpunch.com
Workwell RFID cards and key fobs use 26-bit Wiegand format at 125KHz. Workwell devices do not support any 3rd party accessories and Workwell accessories are not supported for use with any 3rd party devices. The Workwell support team can only assist with the use of our accessories with our devices. Workwell accessories and devices are not supported to function with any door access systems, ID printers, vending machines, etc.
THIS PRODUCT IS FOR COMMERCIAL USE ONLY.
- The time clock is an electrical device. To reduce the risk of fatal electrical shock and fire, basic safety precautions should be followed, including the following:
- Read all instructions before operating.
- This time clock must be properly installed and located in accordance with these instructions before being used.
- Do not use outdoors.
- Do not expose to water or any liquid.
- Do not place objects into the time clock.
- For best operation, plug the time clock into its own electrical outlet.
- Do not operate the time clock with a damaged cord or plug.
- If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the time clock.
- Plug the time clock into a surge protector or uninterruptible power supply (UPS). If a surge protector is not used and there is a power surge, your warranty may be voided.